Proceed to cart
Customer support:+420 722 959 662, +420 606 721 830obchod@adventure-rally.cz
    Currency
    EUR
    Language
    English
    Home / Navigation / Roadbook / TripMaster / TripMaster by Tech for rally

    TripMaster by Tech for rally

    New
    TFR p 0012 (1)
    €465 €384 excl. VAT
    On stock (>5 pcs)

    Rally Master SG by Tech for rally

    This is a brand new tripmaster built mainly for rallying or adventure bike using. This unit can calculate the trip from the wheel sensor or the external gnss receiver. The gnss receiver also provide functions as a CAP heading or the satellite precise speed.

    • Compact & compatible design for rally brackets and towers
    • Big 4 digits in combination with 5th small digit give you everything what you need to see during the stage
    • Cable connectivity with aftermarket remote buttons, power boxes or wheel sensors

    Detailed information

    Product detailed description

    9db8b6cc-d4c6-4706-94ae-7bce31f1430c a024ddcb-8d63-46a1-bbaa-7bdba797bbfd f6697ae5-7f27-4b78-80c7-c66392dbda44

    Focus on rally riding

    The Rally Master SG is device developed by a motorcycle rider for pure rally purpose. The display communicates everything in direct way and as clean as possible. 
     
     
     

    GNSS and wheel sensor

    Device is using GNSS constellations and the wheel sensor for a rally navigation. Using external gnss antenna improves the reception quality. This GNSS receiver is professional grade receiver with one meter-level accuracy and supports concurrent reception of four GNSS systems (GPS, Glonass, Gallileo and Beidou together).
     

    Ruggle design

    Whole unit is very durable thanks to the aluminium body with thick walls. The display is protected by a glass lens that has high impact protection against the crack. Surface is made of  anodized aluminium.

     Package includes:

    • Rally Master SG unit
    • GNSS receiver
    • Wheel sensor
    • Antivibration installing set
    • Dust caps
    • EN manual.

     Durable design - the shell of this unit is made from an aluminium and anodized. The most exposed walls are strengthened so that the unit cannot be damaged by hitting from the stones e.g. All unit are dust and water proof.

    TFR-p_0012 (1) The display - the unit uses segment display with large main four digits for showing the data, but also includes one 5th smaller digit for showing the trip with 100.00 resolution. Helping icons are for clear detection what source is your trip based on, or what mode are seeing. This display is developed for using and reading under the direct sunlight, but also contains yellow LED backlight for using in the dark stages.

     

    Built-in buttons - you can control this unit from its both sides (left or right), because contains 3-buttons on each side (same layout as on aftermarket remote buttons). This feature is helpful when you use your tripmaster too close to each other. For easy switching between the modes, there is one dedicated center button  for one finger control. The up and down buttons are for setting the trip and many other functions. TFR-p_0013


    TFR-p_0017 Cable compatibility - you can find 4 cables on the back side for connecting the power, remote buttons, gnss receiver and wheel sensor. All cables have durable insulation and M8 connectors and are compatible for using aftermarket remote buttons, wheel sensors, or powering devices.

     

    GNSS - external receiver GNSS is professional grade receiver with one meter-level accuracy and supports concurrent reception of four GNSS systems. The high number of visible satellites enables the receiver to select best signals. This maximizes the position accuracy, in particular under challenging conditions such as in rally stages. The possibility to mount the receiver on the top of the rally tower or the roof maximizes the signal receiving strength. The cable length is 0.5m. If you need longer cable, you can use M8 4pin cable extension. TFR-p_0028

     

     

    Modes - there is a customizable race menu that you can set according your race needs.

    All possible modes:

    1. Trip1
    2. Trip timer 1
    3. Trip2
    4. Trip timer2
    5. CAP
    6. Speed/MaxSpeed
    7. Odometer
    8. Clock
    9. Timer1
    10. Timer2
    11. Fuel

    In the setup menu, you can set your trip source (wheel, gnss, automatic), trip resolution (0.0 or 0.00), turn ON/OFF features, set the wheel circumference, reset, and many other.

     Dimensions: W/H/D: 90 x 52 x 23 mm, 235g weight